Hardware Programmers Software Courses Books Accessories Development Services Distributors Subscribe Contact Login

Programming Accessories
PASBW for SpyBiWire
JFPC JTAG to FPC Adapter
SB6V 6v Power Adapter

SoftBaugh Custom LCDs

RF Module Accessories

Breadboard Accessories

Cables and Wires

Click on the picture to enlarge.

Related Items


Host board for the MRF1611 line of RF modules.

It features:

  • 50 mil headers for connection of MRF1611 RF modules.
  • All available MRF1611 port pins exposed at headers.
  • Prototyping area.
  • Optional BRS232 footprint for RS232 communication.
  • 2x AAA power supply via TPS60210.
  • Optional lab power input via terminal block.
  • JTAG+ header for programming and optional BSL access.
  • I2C header with optional 10k pullups.
  • VeREF+ and VeREF- conditioning with 4.7uF caps.
  • 4 user switches.
  • 50k potentiometer for analog experimentation.

Pricing Information

Pricing for the HMRF1611 is:

  • Qty 1+, $59.00
  • Click here to view price breaks.

back to top

Ordering Information

To order this product, you may order directly from us (Net 30 or credit card) by phone or e-mail, or here via our e-store:

Add the HMRF1611 to your shopping cart.

Or, if you prefer, order via one of our distributors.

back to top

Related Items

  • Need an RS232 interface? Add our BRS232 to the footprint provided in the prototyping area.
  • Hosts our MRF1611CC1100 RF module.
  • Adapt this board for bootloader operations with our JTAGPLUS.
  • Program a hosted RF module via JTAG with our USBP USB programmer.
  • Bootload a hosted RF module with our UBSL bootloader.

back to top


HMRF1611 Schematics

back to top


Q1: Are the labels for LBI and LBO switched?
A1: Yes, they are switched on v1 boards.

Q2: Is P5.7 mislabeled?
A2: Yes. P2.7 is incorrectly labeled as P5.7 on v1 boards.

Q3: How do I assemble a BRS232 to the HRMF1611?
A3: The BRS232 ships with a 14-pin header strip, a 5-pin header strip, and a 2-pin header strip. Leave the 14-pin and 2-pin strips as is, and cut another 2-pin strip from the 5-pin strip. Place the 14-pin header strip into the signal site to the right of the prototyping area, and the two 2-pin strips into the power sites in the middle of the prototyping area. All three sites are highlighted with round holes. Place the BRS232 atop these strips. Finally, solder all three strips from the top of the BRS232 and from the bottom of the HMRF1611.

back to top

Leave Feedback

As SoftBaugh continues efforts to increase features, along with ease of use, we find and consider feedback and suggestions essential to creating a better product for the customer.

Please note that if your intent is to receive technical support, or you if have general questions regarding this item, it is best to contact SoftBaugh directly, by phone or e-mail.

Feedback Form

back to top

Return Policy:
We will gladly accept returns on products as long as you notify us for an RMA number within 30-days and the items are returned in a re-saleable condition. Non-defective returned products are subject to a 20% restocking fee. Items damaged due to misuse are not returnable.

back to top

Handling Fee: Unless otherwise specified, SoftBaugh orders under $100.00 USD will be subject to a $10.00 USD handling fee.

Signature Proof of Delivery Required: We require a signature for all shipments. If you wish to waive the signature requirement, please mention it in the order comments. If you choose to waive the signature you assume all responsibility for receipt of the shipment.

Restocking Fee: All non-defective returns are subject to a 20% restocking fee. Shipping charges are not refundable. Product must be unopened in original packaging and suitable for resale. Products held for over 30 days or returned without a Return Material Authorization will not be accepted. Items damaged due to customer mishandling or misuse are not returnable. Software is not returnable.

Customers outside US: Due to the high cost of sending and accepting wire transfers, any orders paid by wire will be subject to a $40 wire fee. We accept checks at no additional charge by mail in US currency, or in foreign currency at the applicable current exchange rate. Please state your payment preference in the order comments. We require payment on all international orders before shipping.

Credit cards: We accept American Express, Visa, and MasterCard. If you wish to pay using one of these credit card types, fill out the form on the confirmation email you receive after placing your order and fax it back to us. International customers paying by credit card do not incur a wire fee.

Trademark notices: MSP430 and C2000 and specific MSP430 and C2000 part numbers are trademarks of Texas Instruments. EW430, IAR, IAR Systems, IAR Embedded Workbench, IAR MakeApp, C-SPY, visualSTATE, From Idea to Target and IAR KickStart Kit are trademarks or registered trademarks owned by IAR Systems AB. SoftBaugh and the SoftBaugh logo are registered trademarks of SoftBaugh, Inc. SoftBaugh board nomenclature and LCD part numbers are the trademark of SoftBaugh, Inc. Zigbee is the trademark of the Zigbee Alliance.

© 2001 - 2009 SoftBaugh, Inc. All rights reserved.